Iso Din Head Unit Provision - Metra 99-6505 Instrucciones De Instalación

ISO DIN Head Unit Provision

1. Align the holes in the ISO snap in
brackets with the holes in the head unit
and mount the brackets to the head unit
with the screws supplied with the unit.
(Figure A)
2. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
3 Slide the head unit/bracket assembly
into the radio opening until the side
clips engage. (Figure B)
4. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-6505
11
(Figure A)
(Figure B)