Changing the displayed item
Each time you press (DSPL), the item changes
as follows:
Elapsed playback time
Disc name*
Track name*
If there is no prerecorded title for a disc "NO
*
1
D.Name" will appear on the display.
2
If a track title is not prerecorded, "NO T.Name"
*
will be displayed.
After you select the desired items, the display
will automatically change to the Motion
Display mode after a few seconds. In the
Motion Display mode, all the above items are
scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 18.)
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 10 characters and the Auto Scroll
function is on, information automatically
scrolls across the display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD.
If you press (DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
During playback, press (SHIFT).
2
Press (2) (SET UP) repeatedly until
"A.Scrl" appears.
3
Press (4) (n) to select "A.Scrl on".
4
Press (SHIFT).
To cancel Auto Scroll, select "A.Scrl off" in
step 3 above.
8
$
$
1
$
2
$
Clock
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down and release for each
track you want to skip.
SEEK/AMS
To locate succeeding tracks
To locate preceding tracks
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold. Release the
button when you have found the desired
point.
SEEK/AMS
To search forward
To search backward
Note
If "
" or "
display, you have reached the beginning or the end
of the disc and you cannot go any further.
" appears in the