Tabla de contenido
Publicidad
IMPORTANT
Correct connection of the plug
The wires of the main lead are coloured in accordance
with the following code:
Blue: — Neutral
Brown: — Live
As the colours of the wires in the main lead of this tool may
not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire coloured blue must be connected to the terminal
marked with the letter N or coloured black. The wire
coloured brown must be connected to the terminal marked
with the letter L or coloured red. Neither core must be
connected to the earth terminal.
NOTE:
This requirement is provided according to BRITISH
STANDARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except The United Kingdom.
Noise and Vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 110 dB (A)
Measured A-weighted sound pressure level: 99 dB (A)
Uncertainty K: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Hammer drilling into concrete:
a
h , HD = 8.0 m/s
Vibration emission value
Uncertainty K = 1.5 m/s
2
Equivalent chiselling value:
a
h , CHeq = 7.3 m/s
Vibration emission value
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
0000Book_BMH40-BL_Wuerth.indb
2
2
16
WARNING
— The vibration emission during actual use of the power
tool can differ from the declared total value depending
in the ways in which the tool is used.
— Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
NOTE
Due to Würth's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Disposal
The power tool, accessories and packaging should be
recycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
According to the European Directive 2012/19/EU
on Waste Electrical and Electronic Equipment and its
implementation into national law, power tools that are no
longer usable must be collected separately and disposed
of in an environmentally friendly manner.
16
2019/03/20
14:51:57
Publicidad
Tabla de contenido
