Mounting Flat Panel Screen - PEERLESS SUA746PU Instalación Y Montaje

Mounting and Removing Flat Panel Screen
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screens.
• Be careful not to pinch fingers when opening and closing mount from the wall.
• DO NOT operate or tilt arm assembly when safety latches are in unlocked position. Product may fail and may cause
injury or damage to screen.
• Do not tighten safety/security screw (E) with excessive force. Overtightening can cause screw head to become dam-
aged making it difficult to remove. Tighten screws to 15 in. • lb (1.7 N.M.) maximum torque.
Wall arm assembly (A) must be in closed position to
3
hang screen.
Rotate safety latch with flathead screwdriver into
unlocked position as shown in detail 1.
DETAIL 1
Hook adapter brackets (B) onto the center of wall
arm assembly (A) adapter plate as shown in figure
3.1.
WARNING
SAFETY LATCH
B
A
fig. 3.1
Rotate safety latch with flathead screwdriver and
install safety/security screw (E) through safety latch
into adapter bracket with phillips screwdriver to lock
to adapter plate as shown in detail 2 and detail 3.
8 of 42
ISSUED: 12-01-09 SHEET #: 095-9295-2 01-23-10
B
A
DETAIL 2
E
SAFETY
DETAIL 3
LATCH