3. Automated wash
•
Program the washer using the following parameters:
Phase
Pre Wash
Enzyme Wash
Wash 1
Rinse 1
Dry Phase
•
Upon completion of the draining phase after Rinse 1, stop the cycle and open the washer
door.
•
Remove the device from the washer during the thermal phase and place the device back
into the washer for the dry phase.
•
If necessary, use pressurized air to aid in drying. Visually inspect each device for
cleanliness.
ENZOL® Enzymatic Detergent is validated for cleaning efficacy.
2
Renu-Klenz® is validated for cleaning efficacy.
3
34
Recirculation
Time
2 minutes
2 minutes
2 minutes
2 minutes
7 minutes
Water
Temperature
Cold tap water
Hot tap water
Set point
(66˚C)
Hot tap water
115˚C
Detergent Type and
Concentration
(if applicable)
N/A
Enzymatic Detergent
Non-enzymatic
Detergent
3
N/A
N/A
2