GRAPHITE 58G214 Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 131
potential repair to authorized service workshop.
Do not try to dismantle the charger. All repairs should be made by an authorized service workshop.
Improper charger assembly may cause electric shock or fire.
Disconnect the charger from power supply before starting any maintenance or cleaning.
In case of battery damage or improper use it may produce gas. Ventilate room and seek medical attention
in case of medical symptoms.
Keep the charger clean. Dirt can be the cause of electric shock.
Do not use charger when placed on flammable surface (e.g. paper, textiles) or in proximity of flammable
substance. Greater charger temperature when charging increases risk of fire.
When the charger is not in use, it should be disconnected from mains network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
Li-ion batteries may leak, set on fire or explode when heated to high temperature or short-circuited.
Do not store the batteries in a car in hot and sunny days. Do not open the battery. Li-ion batteries
contain electronic protection devices that, if damaged, may cause fire or explosion of the battery.
Explanation of used symbols
1
2
Max.
50°C
9
10
1,2. Read the instruction manual, observe warnings and safety conditions therein.
3.
Use protective goggles and hearing protectors.
4.
Keep the tool away from children.
5.
Protect against rain.
6.
Device with class II insulation.
7.
Disconnect the power cord before starting maintenance or operation.
8.
Use indoors, protect from water and moisture.
9.
Do not throw into fire.
10. Maximum permissible cell temperature.
11. Recycling
CONSTRUCTION AND USE
Drill is a battery powered tool. Drive consists of a DC commutator motor with permanent magnets and planetary
gear. Drill is designed for screwing in and out screws and bolts in wood, metal, plastics and ceramics, and for
drilling holes in those materials. Cordless, battery-powered power tools are especially useful for works in interior
furnishing, adaptation of premises etc.
Use the power tool according to the manufacturer's instructions only.
3
4
11
16
5
6
7
8

Publicidad

Tabla de contenido
loading

Tabla de contenido