Oven Lamp; Maintenance And Cleaning - Teka FSO-424 Manual De Usuario

IF YOUR OVEN DOES NOT OPERATE
Please check if the power cord is plugged to the outlet securely.
Check the electrical installation.
Check the fuse.
Check for any damage to the power cord. Contact the authorized dealership if the issue
is not resolved.

OVEN LAMP (*)

Replacement of the Oven Lamp
WARNING: To avoid electric shock, ensure that the device circuit is open before
changing the lamp.
(Open circuit means that the power is cut-off.)
Cut off the power supply of your appliance first and ensure that the it is cooled down.
Remove the glass protector by rotating as shown in the figure. Using plastic gloves may
help you if you have difficulty in rotating it.
Then, remove the lamp by rotating it, and install the new lamp with the same
specifications. Replace the glass protector, plug the appliance and complete the
replacement procedure. You can now use your oven.
Type G9 Bulb

MAINTENANCE AND CLEANING

Unplug your appliance.
Appliance may be very hot while it is being operated or after a short while
when it is operated. In this case, do not touch hot parts.
Do not clean the interior parts, door, tray and other parts of the oven with
tools such as bristle brushes, steel wool or knives. Do not use abrasive
and scratching detergents.
220-240 V,AC
15-25 W
Figure 1
Type E14 Bulb
13
220-240 V, AC
15-25 W
Figure 2