Additional Information; Warranty Information - D-Link DGS-1210 Guía De Introducción

1. Launch the Telnet software and connect to the
IP address of the switch. In Microsoft
operating systems, this can be done by typing 'telnet'
and the switch's IP address in a command prompt.
2. When you are prompted for a username and
password, enter 'admin' for the default user name and
password.
5. SNMP (depending on the
purchased model)
You can manage the Switch with D-Link D-View, or any
other SNMP-compatible program. The SNMP function is
disabled by default and must be enabled on the switch
first by using either the Web UI, DNA, the console, or
Telnet.
D-View SNMP Network Management System is
a comprehensive standard-based management
tool designed to centrally manage critical network
infrastructure. D-View provides useful tools to allow
network administrators to effectively manage device
configurations, fault tolerance, performance, and security.
D-Link offers a free version of D-View which can allow
you to manage up to 25 devices. You can download or
get more information on the following website:
dview.dlink.com/.

Additional Information

If you are encountering problems setting up your
network, please refer to the user manual that came with
the switch. It contains much more detailed information to
get you up and running with your network.
Additional help is available through our offices listed at
the back of the user manual or online. To find out more
about D-Link products or marketing information, please
visit the D-Link website at: http://www.dlink.com/.

Warranty Information

The D-Link Limited Lifetime Warranty information is
available at the following website:
com/.
6
Windows
®
http://
http://warranty.dlink.