Compliance - OHAUS Aviator 3000 Serie Manual De Instrucciones

Aviator 3000 Series
9.

COMPLIANCE

Compliance to the following standards is indicated by the corresponding mark on the product.
Marking Standard
This product conforms to the EMC directive 2004/108/EC, the Low Voltage
Directive 2006/95/EC and the Non-automatic Weighing Instruments
Directive 2009/23/EC. The complete Declaration of Conformity is available
at europe.ohaus.com/europe/en/home/support/compliance.aspx.
UL 60950-1, 1st Edition, 2007-10-31
CSA C22.2 No. 60950-1-03, 1st Edition, 2006-07
Important notice for verified weighing instruments
Weighing instruments verified at the place of manufacture bear one of the
preceding marks on the packing label and the green 'M' (metrology) sticker on
the descriptive plate. They may be put into service immediately.
Weighing instruments to be verified in two stages have no green 'M' (metrology)
on the descriptive plate and bear one of the preceding identification marks on the
packing label.
The second stage of the initial verification must be carried out by the approved
service organization of the authorized representative within the EC or by the
national weights and measures (W+M) authorities.
The first stage of the initial verification has been carried out at the manufacturer's
work.
It comprises all tests according to the adopted European standard
EN45501:1992, paragraph 8.2.2.
If national regulations limit the validity period of the verification, the user of the
weighing instrument must strictly observe the re-verification period and inform the
respective W+M authorities.
EN-23