Safety Information - Project Source FW6BC002CP Manual De Instrucciones

SAFETY INFORMATION

• Follow these installation instructions carefully. Proper installation is the installer's responsibility.
• Failure to follow correct installation procedures can cause the faucet to become loose, which can
result in serious injury.
• The products should be installed by a locally licensed plumber.
• When installing the flexible hose, please note there should be no torsion or deformation.
• Do not fold it into a V or L shape, and do not use it if there are any cracks or damage.
NOTE: Please DO NOT use plumber's putty on plastic components. Use silicone caulk if sealant is
required.
PREPARATION
Before beginning assembly, installation or operation of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or damaged, do not attempt to
assemble, install or operate the product.
Estimated Assembly Time: 12 minutes
Tools Required for Assembly (not included): Adjustable Wrench, Silicone Sealant, Phillips Screwdriver.
Helpful Tools (not included): Supply stops, Supply tubing/fittings, Basin wrench, Safety goggles.
WARNING
This product is engineered to meet the EPA WaterSense flow requirement. The flow rate is governed
by the flow controller. If replacement is ever required, be sure to replace it with a WaterSense
compliant flow controller to retain the water conserving flow rate of this product.
3