Briggs & Stratton G80 Manual Del Operador página 16

Menu
The following chart shows the icons for the buttons that control the system control panel.
MENU
ESCAPE (EXIT)
RIGHT ARROW
LEFT ARROW
MANUAL MODE
OFF
AUTOMATIC MODE
The following chart describes key sequences for accessing different programming modes;
16
ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
RETURN TO LAST MENU ITEM
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
USED TO MANUALLY START THE GENERATING SET. PRESS AND
HOLD BUTTON TO START THE GENERATING SET.
TURNS OFF RUNNING GENERATING SET, PREVENTS UNIT FROM
STARTING, AND RESETS ANY DETECTED FAULTS.
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON TO
PUT UNIT INTO AUTOMATIC MODE. IF A UTILITY POWER OUTAGE
IS SENSED, THE
SYSTEM WILL START THE Generating set. WHEN UTILITY POWER
IS RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL
TEMPERATURES, SHUTS OFF THE Generating set, AND WAITS
FOR THE NEXT UTILITY POWER OUTAGE.
PRESS AND HOLD [ARROW LEFT AND ARROW RIGHT]
GENERAL
FOR THREE SECONDS TO ENTER THE PROGRAM
SET-UP
MODE.
PRESS AND HOLD [ARROW LEFT, ARROW RIGHT AND
ADVANCED
ESC] FOR THREE SECONDS TO ENTER THE ADVANCED
SETTINGS
SETTINGS MODE.
WIRELESS
PRESS AND HOLD [MENU AND ESC] FOR THREE
SECONDS TO ENTER THE WIRELESS LINKING MODE.
LINK MODE