Installation; Notes On Installation - Dometic CoolAir RTX1000 Instrucciones De Instalación

Installation

7 Installation
!
CAUTION!
Incorrect installation of the parking cooler may place the safety of the
user at risk.
The manufacturer accepts no liability whatsoever for personal injury or
property damage if the parking cooler is not installed according to this
installation manual.
A
NOTICE!
z The parking cooler may only be installed by qualified personnel from
a specialist company. The following information is intended for tech-
nicians who are familiar with the guidelines and safety precautions
to be applied.
z The manufacturer only assumes liability for parts included in the
scope of delivery. The validity of the warranty expires if the device is
installed together with third-party parts.
z Check whether the roof of the vehicle is able to support the weight of
a person before climbing onto it. Ask the vehicle manufacturer about
the permitted roof loads.
7.1

Notes on installation

The following tips and guidance should be followed when installing the
parking cooler:
!
WARNING! Electric shock hazard
Before carrying out any work on electrically operated components,
make sure that they are disconnected from the power supply.
Before installing the parking cooler, disconnect all connections to the
vehicle battery.
z The GPS aerial has to be repositioned in order to install the parking
cooler.
z Before installing the parking cooler, check whether any vehicle
components could be damaged or have their function impaired as
a result of the installation.
Check the dimensions of the system to be installed (fig. 2).
The dotted line indicates the middle of the roof hatch opening.
z The top cowl of the parking cooler can be painted (fig. 3). The
manufacturer recommends that the painting is done by a specialist
paint shop.
8
CoolAir RTX1000, RTX2000
EN