Toshiba MML-AP0074NH-E Manual Del Propietário página 22

Q Adjusting airfl ow direction
• Adjust the airfl ow direction properly. Otherwise, it
might cause discomfort and make the room
temperature uneven.
• Adjust the vertical airfl ow using the remote controller.
• Adjust the horizontal airfl ow manually.
Adjust the vertical airfl ow
The air conditioner automatically adjusts the vertical
airfl ow direction in accordance with the operating
conditions when AUTO or A mode is selected.
To set the airfl ow direction you desire
Perform this function when the air conditioner is in
operation.
PRESET
QUIET
SWING
1
1
FIX button
Keep pressing or pressing briefl y the FIX button
on the remote controller to move the louver in the
desired direction.
• In subsequent operations, the vertical airfl ow is
automatically set in the direction to which you
adjusted the louver using the FIX button.
NOTE
• Operating angle of vertical airfl ow louver will be
different during cooling, dry and heating operation.
• Concerning airfl ow from the lower air outlet grille.
In the cooling operation, airfl ow is blown out only
from the upper air outlet grille under some operating
conditions. In the dry operation, airfl ow is blown out
only from the upper air outlet grille.
20-EN
1112750104.indb 20
FAN
TEMP
MODE
COMFORT
SLEEP
FIX Hi-POWER
To automatically swing the airfl ow direction
Perform this function when the air conditioner is in
operation.
PRESET
QUIET
SWING
1
1
SWING button
Press the SWING button on the remote controller.
• To stop the function, press the SWING button.
CAUTION
• The FIX and SWING buttons will be disabled when
the air conditioner is not in operation (including
when the ON timer is set).
• Do not operate the air conditioner for long hours
with the airfl ow direction set downward during the
cooling or dry operation.
Otherwise, condensation may occur on the surface
of the vertical airfl ow louver and cause dew
dripping.
• Do not move the vertical airfl ow louver manually.
Always use the FIX button.
If you move the louver manually, it may malfunction
during operation.
If the louver malfunctions, stop the air conditioner
once, and restart.
• When the air conditioner is started immediately
after it was stopped, the vertical airfl ow louver
might not move for 10 seconds or so.
• Louver operation is limited when performing group
control. (see page 14)
– 20 –
Owner's Manual
FAN
TEMP
MODE
COMFORT
SLEEP
FIX Hi-POWER
12/8/2559 BE 5:07 PM