Change Fine Filter
► If the suction power is no longer sufficient in spite of a filter cleaning, the fine filter must be
changed.
► In general, the fine filter should be changed every 2 years.
Do not clean the fine filter manually (e.g. with compressed air, brush, water, etc.), as this leads to
damage of the filter material!
When installing the fine filter please ensure that it is positioned correctly, otherwise leakages may result.
See the assembly instruction at the end of the instruction manual, which is also attached to the new fine
filter.
Spare Parts
You can find components subject to wear and the spare parts on
the spare part list in the internet at www.renfert.com/p918.
Enter the following item number: 29340000
The components excluded from the warranty (such as consum-
ables or parts subject to wear and tear) are marked on the spare
part list.
Disposal Information
Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
- 5 -
EN
Subject to change