Dash Disassembly - Metra 95-8225G Instrucciones De Instalación

1. Unclip and remove the trim panel
to the right of the shifter. (Figure A)
2. Remove (1) Phillips screw from
the bottom of the climate control
then unclip and remove the climate
control. (Figure B)
3. Remove (4)10 mm bolts securing
the radio. (Figure C)
Note: You will need a universal
swivel head socket adapter to get
to the bottom left bolt.
4. Remove (4) Phillips screws
securing the factory radio to the
A/C vent panel. (Figure D))
Continue to kit assembly

Dash Disassembly

(Figure A)
(Figure B)
95-8225G
(Figure C)
(Figure D)
2
Rear view - Radio and A/C vent panel
REAR VIEW - RADIO AND A/C VENT PANEL
Radio
RADIO