Vision Fitness TF40 Manual Del Propietário página 10

T40 ASSEMBLY STEP 4
HARDWARE FOR STEP 4 :
T40
ARC
SPRING
BOLT (A)
WASHER (E)
WASHER (B)
ONLY
8.4 mm 20 mm
8.2 mm
Qty: 6
Qty: 6
Qty: 6
T40 ONLY
CONSOLE
MAST
MAST
COVERS
SCREWS (G)
BASE FRAME
18
VF_12_Treadmills_OM_Trilingual_Rev2_0.indd 18-19
NOTE: This step is for T40 models only.
Open HARDWARE FOR STEP 4.
A
SCREW (G)
12 mm Gently place CONSOLE BASE on top of
B
Qty: 6
CONSOLE MASTS.
NOTE: Be careful not to pinch the console
cables while attaching the console base.
CONSOLE BASE
CONSOLE CABLES
Connect the CONSOLE CABLES and tuck
BOLTS (A) C
them inside the CONSOLE MASTS and slide
SPRING WASHERS (B)
CONSOLE BASE into CONSOLE MASTS.
ARC WASHERS (D)
Connect the CONSOLE BASE to CONSOLE
D
MASTS using 6 ARC WASHERS (E), 6
SPRING WASHERS (B) and 6 BOLTS (A).
NOTE: Tighten all bolts from STEPS 1–3.
Attach MAST COVERS to BASE FRAME
E
using 3 SCREWS (G).
F Repeat on other side.
TF40 ASSEMBLY STEP 4
HARDWARE FOR STEP 4 :
ARC
SPRING
BOLT (A)
WASHER (E)
WASHER (B)
8.4 mm 20 mm
8.2 mm
Qty: 6 Qty: 6
Qty: 6
TF40 ONLY
BOLTS (A)
CONSOLE BASE
SPRING WASHERS (B)
ARC WASHERS (D)
CONSOLE CABLES
CONSOLE MAST
SCREWS (N)
BASE FRAME COVER
BASE FRAME
NOTE: This step is for TF40 models only.
Open HARDWARE FOR STEP 4.
A
SCREW (N)
12 mm Gently place CONSOLE BASE on top of
B
Qty: 4
CONSOLE MASTS.
NOTE: Be careful not to pinch the console
cables while attaching the console base.
Connect the CONSOLE CABLES and tuck
C
them inside the CONSOLE MASTS and slide
CONSOLE BASE into CONSOLE MASTS.
Connect the CONSOLE BASE to CONSOLE
D
MASTS using 6 ARC WASHERS (E), 6
SPRING WASHERS (B) and 6 BOLTS (A).
NOTE: Tighten all bolts from STEPS 1–3.
Attach the BASE FRAME COVERS to the
E
BASE FRAME using 4 SCREWS (N).
TF40
ONLY
19
8/18/14 11:33 AM