Vision Fitness TF40 Manual Del Propietário página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TF40 ASSEMBLY STEP 1
TF40 HARDWARE FOR STEP 1 :
TF40
SPRING
ARC
BOLT (A)
WASHER (B)
WASHER (C)
20 mm
ONLY
8.2 mm
8.4 mm
Qty: 6
Qty: 6
Qty: 6
TF40 ONLY
LEAD WIRE
RIGHT CONSOLE MAST
CONSOLE CABLE
SCREWS (N)
LEFT CONSOLE MAST
SCREW (M)
BASE FRAME COVER
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (C)
BASE FRAME
12
VF_12_Treadmills_OM_Trilingual_Rev2_0.indd 12-13
NOTE: This step is for TF40 models only.
A
Open HARDWARE FOR STEP 1.
SCREW (M)
SCREW (N)
20 mm
12 mm
Qty: 2
Qty: 4
B
Slide BASE FRAME COVERS over BASE FRAME.
Attach BASE FRAME COVERS using 2 SCREWS
(M) and 4 SCREWS (N).
C
Attach LEAD WIRE to CONSOLE CABLE and pull
LEAD WIRE through RIGHT CONSOLE MAST. After
pulling the LEAD WIRE through the mast, the top of
the CONSOLE CABLE should be located at the top
of the mast. Detach and discard LEAD WIRE.
NOTE: Do not pinch console cable when placing
the mast onto the base frame.
D
Attach CONSOLE MAST to BASE FRAME using 3
BOLTS (A), 3 SPRING WASHERS (B) and 3 ARC
WASHERS (C).
NOTE: Do not tighten bolts until step 4 is complete.
E
Repeat step C on other side.
TF20 ASSEMBLY STEP 1
TF20 HARDWARE FOR STEP 1 :
SPRING
ARC
BOLT (A)
WASHER (B)
WASHER (C)
20 mm
8.2 mm
8.4 mm
Qty: 6
Qty: 6
Qty: 6
TF20 ONLY
RIGHT CONSOLE MAST
LEAD WIRE
LEFT CONSOLE MAST
CONSOLE CABLE
BASE FRAME COVER
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (C)
BASE FRAME
NOTE: This step is for TF20 models only.
A
Open HARDWARE FOR STEP 1.
B
Slide BASE FRAME COVER up RIGHT CONSOLE
MAST. Attach LEAD WIRE to CONSOLE CABLE
and pull LEAD WIRE through RIGHT CONSOLE
MAST. After pulling the LEAD WIRE through the
mast, the top of the CONSOLE CABLE should be
located at the top of the mast. Detach and discard
LEAD WIRE.
NOTE: Do not pinch console cable when placing the
mast onto the base frame.
C
Place RIGHT CONSOLE MAST over BASE FRAME.
D
Attach CONSOLE MAST to MAIN FRAME
BRACKET using 3 BOLTS (A), 3 SPRING
WASHERS (B) and 3 ARC WASHERS (C).
NOTE: Do not tighten bolts until step 4 is complete.
E
Slide BASE FRAME COVER up LEFT CONSOLE
MAST. Repeat STEP D to attach LEFT CONSOLE
MAST.
F
Slide BASE FRAME COVERS down.
8/18/14 11:33 AM
TF20
ONLY
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tf20T40

Tabla de contenido