Product Description - Wahl 4417 Instrucciones De Uso

E N G L I S H
General user information
Information about using the operating manual
f Before using the appliance for the first time, you must read
and understand the operating manual completely.
f Consider the operating manual as part of the product and
store it in a safe and accessible place.
f This operating manual is also available in PDF format from
our service centres. The EC declaration of conformity can
de
also be requested in other official EU languages from our
en
service centres.
f Include this operating manual if passing the appliance on
fr
to a third party.
it
Explanation of symbols and notes
The following symbols and signal words are used in this oper-
es
ating manual, on the appliance or on the packaging.
pt
PROHIBITED
This symbol prohibits the use of the appliance near
nl
bathtubs, showers, washbasins and other water-filled
da
containers.
sv
DANGER
Danger of electric shock which may result in serious
no
physical injury or death.
fi
DANGER
Danger of explosion which may result in serious
tr
physical injury or death.
pl
DANGER
Danger due to the use of flammable materials. Dan-
cs
ger of fire development which may result in serious
physical injury or death.
sk
WARNING
hr
Warning of possible physical injury or a health risk.
hu
CAUTION
sl
Information about danger of material damage.
ro
Note with useful information and tips.
bg
Action to be taken by owner.
f
ru
Carry out these actions in the sequence described.
1.
2.
uk
3.
et
lv
lt
el
12
ar

Product description

Description of parts (Fig. 1)
A Heating plates, springloaded
B Handle
C Mains cable with anti-twist protection
D Temperature controller
E LED display
F On/off switch
Technical data
Operating voltage: 220 – 240 V AC / 50/60 Hz
Power consumption: 46 W
Dimensions (L x W x H): 260 x 29 x 36 mm
Weight: 210 g without mains cable
Operating conditions
Ambient temperature: 0°C – +40°C
The appliance is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Direc-
tive 2014/30/EU and Low Voltage Directive 2014/35/EU.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage
stated on the nameplate.
Operation
1. Connect to the mains power supply.
2. Switch on the hair straightener using the on/off switch
(Fig. 2ⓐ). The LED display is red.
3. Select the desired temperature (150°C – 230°C).
· To increase the temperature, move the tempera-
ture controller in a clockwise direction (Fig. 3ⓐ).
· To reduce the temperature, move the temperature
controller in an anticlockwise direction (Fig. 3ⓑ).
4. Once the operating temperature has been reached, the LED
display flashes.
5. After using the hair straightener, switch it off using the on/
off switch (Fig. 2ⓑ). The LED display goes out.
6. Disconnect from the mains.
7. Allow the hair straightener to cool down.