Kit Assembly - Metra 99-7015CHG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the pocket to the radio brackets
with the (4) #8 x 3/8" truss head Phillips
screws provided. (Figure A)
2. Mount the bracket/pocket assembly
to the housing trim panel with the
remaining (4) #8 x 3/8" truss head
Phillips screws provided.. (Figure B)
3. Slide the radio into radio brackets and
secure with screws supplied with the
radio. (Figure C)
4. Locate the factory wiring harness
and antenna, plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Place the new radio assembly into the
dash. Reconnect the negative battery
terminal and test the radio for proper
operation.
6. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A) (Figure B) (Figure C)
REV. 7/15/21 INST99-7015CHG
3