Wireless Flash (Master/Slave) - Walimex Pro Light Shooter 360 TTL Manual De Instrucciones

6.6 Wireless flash (master/slave)

6.6.1 Wireless flash function
Compatibility:
Light Shooter 360 TTL/C (Canon): Speedlite 580EX-RT, 600EX-RT, and 7D,
60D and 600D cameras
Light Shooter 360 TTL/N (Nikon): Speedlite SB-900, SB-910, and D7100,
D7000 and D800 cameras.
The Light Shooter (slave setting) can be set and used via the wireless func-
tion with original flashes (master setting) by Canon or Nikon. Outdoor range:
approx.10 m; indoor range: approx. 15 m.
Activating wireless flash in Canon:
• Press the wireless function button.
• The display will show the flash symbol and the word <Master>. The flash is
in master mode.
• Press the wireless function button twice.
• The colour in the display will switch to red. The display will show the flash
symbol and the word <Slave>. The flash is in slave mode.
52
Activating wireless flash in Nikon:
• Press the wireless function button.
• The display will show the flash symbol and the word RPT. The display colour
will switch to green. The flash is in master mode.
• Press the wireless function button again.
• The display will show the flash symbol and the word <Slave>. The display
colour will switch to orange. The flash is in slave mode.
Master Flash off
• Press function button 4. The display will show Menu 2.
• Press function button 3 to switch the master function group on or off.
ON or OFF will appear on the display.
Switching communication channel
If there are other flashes in the immediate vicinity, you can use another channel
for communicating with the flash. The channel for the master and slave must
be the same.
53