Connect Powerblock To The Power Supply For Charging; Connect Flash Device To The Powerblock; Switch Powerblock On And Off; Transportation And Storage Of Powerblock - Walimex Pro Light Shooter 360 TTL Manual De Instrucciones

5.2. Connect Powerblock to the power supply for charging

WARNING
Please pay attention to the safety notes
Charging process with the mains battery charger
• Plug the charging cable into the socket on the Powerblock and
connect the mains battery charger with the power supply.
NOTE
Compare the local power network with the connected load of the device.
If the values differ, please contact info@walser.de.
• The Powerblock starts charging right away.
• LEDs of the status display flash.
• Once the Powerblock is fully charged, the LED charging display lights up.
5.3. Connect flash device to the Powerblock
WARNING
Please pay attention to the safety notes
• Plug connecting cable (not included in delivery) into connecting socket
of Powerblock and connect to your compact flash.
• Switch on Powerblock using the on/off switch.
28
6. Switch Powerblock on and off
• Switch Powerblock on: press on/off switch.
The status display lights up green. The Powerblock is ready to use.
Switch Powerblock off: press on/off switch.
• All displays disappear.
• You can connect up to two flash devices.
NOTE
To guarantee functionality appropriate batteries have to be inserted in
your compact flash (see instruction manual of your flash device). Without
batteries it is not possible to trigger a flash. (Flashes from Metz could be
different and work without inserting the batteries.).
To guarantee functionality please ensure the correct connection to the
flash. Otherwise the device will switch off automatically.

7. Transportation and storage of Powerblock

• Switch Powerblock off. See Switch Powerblock on and off.
• Allow for Powerblock to cool off completely.
WARNING
Danger of fire due to hot device components. Allow for device to cool down
completely.
• If needed, please clean Powerblock. See Cleaning the Powerblock.
• Please put Powerblock and all dismantled elements into original
packaging and transport or store according to requirements of the
technical specifications. See Technical specifications.
29