Technical Data; Check Before Operation - AL-KO TECH 120 OHV Manual De Instrucciones

Technical Data

Motor type
Length x width x height
Unladen weight
Displacement
(bore x stroke)
Power
Engine oil fill volume
Tank content petrol
Cooling system
Ignition system
Crankshaft rotation
Electrode clearance spark
plug
Transport
Transport the engine only when fuel tank is empty.
„
Always transport the engine with the spark plug at the
„
top. Otherwise it may lead to:
Smoking
„
Difficulty in starting
„
A sooty spark plug
„

Check before operation

Warning!
Always conduct a visual check prior to operation.
The equipment must not be used if any machine
components are damaged or worn.
Check the general condition of the engine
Signs of oil or fuel leaks on the outside or underside of
„
the engine
Signs of damage
„
All bolts and nuts are tight
„
All protective covers are attached
„
Fuel level
„
Oil level
„
Air filter element
„
474169_c
Tech 120 OHV
390 x 370 x 230 mm
13 kg
118 cm
3
(60 x 42 mm)
1.8 kW / 2850 rpm
0.6 l
1.3 l
Air cooling
Transistor magneto ignition
clockwise
0.6 mm - 0.8 mm
Tech 135 OHV
420 x 360 x 290 mm
12.5 kg
135 cm
3
(64 x 42 mm)
2.0 kW / 2850 rpm
0.6 l
1.3 l
Air cooling
Transistor magneto ignition
clockwise
0.6 mm - 0.8 mm
Fill with fuel and lubricant
Safety
Warning - Fire hazard!
Petrol is highly flammable.
Sparks occur when the engine is started. This may
ignite flammable gases in the vicinity.
Combustible materials such as leaves, grass etc
can ignite.
Store petrol only in containers made for that purpose.
„
Refill with petrol only outdoors.
„
Do not smoke during refilling.
„
Do not remove fuel cap while engine is running or still
„
hot.
Replace damaged fuel tank or fuel cap.
„
Always ensure that fuel cap is closed tightly.
„
In case of petrol spillage:
„
Do not start engine.
„
Do not test the ignition.
„
Clean the equipment.
„
Let the engine cool off and prevent spillage when
„
refilling the tank.
GB
Tech 165 OHV
420 x 360 x 290 mm
14 kg
163 cm
3
(68 x 45 mm)
2,5 kW / 2850 rpm
0.6 l
1.3 l
Air cooling
Transistor magneto
ignition
clockwise
0.6 mm - 0.8 mm
15