Kit Assembly - Metra 95-7807 Instrucciones De Instalación

Double DIN radio provision
1. Affix (2) factory clips to the radio
housing. (Figure A)
2. Attach the climate switches to the radio
housing using (6) of the #8 x 1/2" screws
on the upper and outside mounts. (Do
not install the screws on the bottom
mounts shared by the radio brackets
until installing the radio/bracket
assembly.) (Figure A)
3. Mount the radio to the brackets with
the screws provided by the aftermarket
radio. (Figure B)
6

KIT ASSEMBLY

(Figure A)
(Figure B)
4. Mount the radio assembly to the radio
housing by installing (4) of the supplied
#8 x 1/2" screws to the shared radio
brackets. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and AXXESS.
6. Clip the new radio assembly into the
dash and reassemble dash in reverse
order of disassembly.
(Figure C)
|
386.257.1187 MetraOnline.com