Intended Use; Safety Instructions - AL-KO SOLO 116 Manual De Instrucciones

Introduction
Read this documentation before starting up the
machine. This is a precondition for safe working and
flawless operation.
Observe the safety warnings in this documenta-
„
tion and on the machine.
This documentation is a permanent integral part
„
of the product described and must be passed on
to the new owner if the machine is sold.
Explanation of symbols
Caution!
Following these safety warnings carefully can pre-
vent personal injury and/or material damage.
Special instructions for greater ease of under-
standing and improved handling.
Meaning of symbols on the machine
Caution!
Read the instruction manual
Wear safety goggles, safety helmet,
ear defenders
Wear gloves
Wear safety shoes
Keep body and clothing away from the
cutting blades / strings
Danger due to ejected objects
The distance between the device
and other persons must be at least
15m(50ft)
15 m.
18

Intended use

This device is intended for trimming and mowing
lawns on private premises.
Using this device for any other or additional purpose
is considered contrary to its intended use.
Caution!
The device must not be used commercially.

Safety instructions

The machine may only be used in perfect techni-
„
cal condition.
Only work when there is adequate daylight or ar-
„
tificial lighting
The machine must not be operated with different
„
cutting tools or attachments.
Wear appropriate working clothes:
„
Long trousers, sturdy footwear, gloves
„
Safety helmet, safety goggles, ear defenders
„
Always ensure stability when working.
„
The machine must not be operated if the operator
„
is under the influence of alcohol, drugs or medi-
cation.
Always operate the machine with both hands.
„
Keep the handles dry and clean.
„
Keep body and clothing away from cutting parts.
„
Keep third parties away from the danger area.
„
Remove foreign bodies from the working area.
„
Always keep the guard, string head and engine
„
free of mowing debris
When leaving the machine:
„
Switch off the engine.
„
Wait until the cutting parts have come to a
„
standstill.
Do not leave the machine unattended.
„
Never allow children or untrained persons to op-
„
erate or service the machine. There may be local
regulations regarding minimum age requirements
for operating the machine.
Accident prevention regulations must be ob-
„
served.
Translation of the original operating instructions