Safety; Safety Instructions; Electric Shock; Hot Components - Wilo Yonos MAXO-Z Instrucciones De Instalación Y Funcionamiento

ing and user maintenance is not allowed to be carried out by chil-
dren without supervision.
3.4

Safety

3.5

Safety instructions

Electrical current
DANGER

Electric shock!

The pump is operated electrically. An electric shock
may be a danger to life!
▪ Only allow work on electrical components to be carried out by qual-
ified electricians (according to EN 50110-1).
▪ Before all work deactivate power supply and guard against acci-
dental switch-on. Work on the control module may only be started
after 5 minutes have elapsed, due to the dangerous residual contact
voltage.
▪ Never open control module and never remove operator controls.
▪ Operate pumps exclusively with intact components and connection
pipes.
Installation and operating instructions Wilo-Yonos MAXO-Z
Magnetic field
DANGER
Magnetic field!
The permanent magnet rotor inside the pump can
pose mortal danger for people with medical implants
(e.g pacemakers) during dismantling.
▪ Never remove the rotor.

Hot components

WARNING
Hot components!
Pump housing and glandless pump motor can get hot
and cause burns when touched.
▪ During operation only touch the control module.
▪ Allow the pump to cool down before commencing any work.
▪ Keep highly flammable materials away.
4

Transportation and storage

4.1

Scope of delivery

➜ Fig. 1 and 2
4.2

Accessories

Separately available:
en
17