SATA jet 5000 B Instrucciones De Servicio página 409

Approval for HVLP mandated areas
Approval for HVLP mandated areas for SATAjet
guns in RP technology (please refer to chart below)
SATA spray gun types as listed in the chart below are approved for sales in
the HVLP mandated areas within the USA listed on the SATA website www.
sata.com/usaapprovals and are subject to the following conditions.
■ The approvals are only valid for the spray guns listed in the chart below
under the supposition that the air pressure supplied to the spray guns shall
not exceed the maximum inlet pressure listed in the chart.
■ Approval for the spray guns listed in the chart below is given within the juris-
diction of the SCAQMD for the application of specific categories of coatings
subject to Rule 1151 only (refer to sata.com website).
■ The analog SATA air micrometer with gauge 0/845, product number 27771,
with color coded reading screen showing max. 29 psi with blue coding or
a SATA adam 2 / SATA adam 2 U (additional digital air micrometer), shall
be attached to the standard spray guns listed in the chart below other than
DIGITAL spray guns (see also chart below) and be in good working condi-
tion during spraying.
For the corresponding part numbers of the digital gauges please refer to the
official list of accessories in the current Dan-Am price list.
Spray gun type
SATAjet 3000 B RP
SATAjet 3000 B RP DIGITAL
SATAjet 4000 B RP
SATAjet 4000 B RP DIGITAL
SATAjet 5000 B RP
SATAjet 5000 B RP DIGITAL
SATAjet X 5500 RP
SATAjet X 5500 RP DIGITAL
SATAminijet 4400 B RP
SATAjet 100 B RP
SATAjet 100 B P
SATAjet 1000 B RP
SATAjet 1500 B RP
Please see www.sata.com/usaapprovals for details!
Max. Additional measurement
inlet accessory required
pressure
35 psi [1],[2],[3]
35 psi
32 psi [1],[2],[3]
32 psi
29 psi [1],[2],[3]
29 psi
29 psi [1],[2],[3]
29 psi
35 psi [1],[2],[3]
32 psi [1],[2],[3]
32 psi [1],[2],[3]
32 psi [1],[2],[3]
29 psi [1],[2],[3]
‒
‒
‒
[2]
SATA adam 2
‒
SATA adam 2 mini
US
spray
®
[1]
Micrometer with
gauge
[3]
SATA adam 2 U