Publicidad
EMU00426
Emergency starting engine
1) Remove the top cowling.
2) Remove the starter by removing the
bolts.
3) Disconnect the start-in-gear protec-
tion cable from the starter if the cable
is equipped.
208012
4) Prepare the engine for starting. See
"STARTING ENGINE" for procedures.
Be sure the engine is in Neutral.
5) Insert the knotted end of the emer-
gency starter rope into the notch in
the flywheel rotor and wind the rope
several turns clockwise.
6) Give a strong pull straight out to
crank the engine. Repeat if necessary.
208014
5-7
GB
Publicidad
Capítulos
