Caberg RIVIERA V4 Manual Del Usuario página 7

4. HOW TO REMOVE/ INSTALL THE WASHABLE CHEEK
PADS
4.1 You can start to remove the cheek pads from either the
right or left side. Remove the cheek pads by releasing the
snap fasteners on the back. (Pic.8)
4.2 Release the neck protection by pulling slightly towards the
inside of the helmet. (Pic. 9)
4.3 To fit the cheeks pads, repeat the above steps in reverse.
5. HOW TO REMOVE/ FIT THE WASHABLE INNER LINER
5.1 Remove the inner liner by detaching the Velcro and pulling
outwards (Pic.10)
5.2 To reinstall the removable liner, place it inside the helmet
and press gently along the entire circumference.
ENG
5