Activating The Screensaver; Setting Only Name; Setting The Welcome Message - Comelit FT SB 09 Hoja Técnica

4D) Activating the SCREENSAVER
This function is deactivated by default.
If activated, the screensaver will appear after a 30-second standby period.
OPERATION
Configuration mode has been
NAME DIRECTORY
accessed (see point 3 in FT
ACCESS CONTROL
SB 09, page 11).
Select the
ONLY NAME
SCREENSAVER/
LANGUAGE 2
SETTINGS menu.
SCREENSAVER
*SCREENSAVER
Press the key to
confirm the selection.
Select "CONFIRM" to
SCREENSAVER
activate the function or
"ESC" to deactivate the
function using the
keys. Press to confirm
the selection.
7H) Setting NAME ONLY
This function is deactivated by default.
When scrolling and during a call from a user, this option allows only the name to be
displayed, without the indirect code.
ACTIVATING OR DEACTIVATING the "ONLY NAME" function
OPERATION
Configuration mode has NAME DIRECTORY
been accessed (see point 3 ACCESS CONTROL
in FT SB 09, page 11).
DISPLAY DESCRIPTION
SETTINGS
ESC
CONFIRM
ESC
*CONFIRM
DISPLAY DESCRIPTION
SETTINGS
OPERATION
Select the
CALL OPERATING
ONLY NAME/
ONLY NAME
SETTINGS menu.
LANGUAGE 2
*ONLY NAME
Press the key to
confirm the selection.
Select "CONFIRM" to
*ONLY NAME
activate the function or
"ESC" to deactivate the
function using the
keys.
ONLY NAME
Press the key to
confirm the selection.

10) Setting the WELCOME MESSAGE

This function can be used to enter a welcome message which is MAX 40 characters long,
covering 4 lines in block capitals.
The welcome message alternates with the normal information screens every 4 seconds.
CAUTION! If the "LANGUAGE 2" function is active, the message cannot under any
circumstances be switched to the second language (see point 4C "Setting LANGUAGE
2", page 10).
ACTIVATING the "WELCOME MESSAGE" function
OPERATION
Configuration mode has NAME DIRECTORY
been accessed (see point 3 ACCESS CONTROL
in FT SB 09, page 11).
FT SB 09
DISPLAY DESCRIPTION
ESC
CONFIRM
ESC
CONFIRM
ESC
*CONFIRM
DISPLAY DESCRIPTION
SETTINGS
11
FT SB 09