X-Rite X-RiteDot CTP10 Manual Del Usuario página 4

G E T T I N G S T A R T E D
generally follows a left-to-right and top-to-bottom sequence. Press this key to
decrease numeric values when editing.
Right Key
Use to toggle an option's status or access a screen where additional options
exist. Press this key to increase numeric values when editing.
Center Key
Use to turn the instrument on and take measurements. Press this key to return
the instrument to the main screen when at the primary or secondary screens.
Instrument Screens
When the instrument is powered-up, the main screen (center) appears. Press
the Left key to see the primary screen option icons. Press the Right key to see
the secondary screen option icons. The options located on these two screens
are covered in more detail in the operation manual, located on the CD.
NOTE: Depending on instrument model, all options shown may not be
available.
Primary Screen
Key Icons
The icons located above the keys indicate a specific action when the key
below it is pressed.
Navigate icon. Moves the highlighted square to the next option when
the key (left) below this icon is pressed.
Return icon. Returns the instrument screen to the previous screen
when the key (center) below this icon is pressed.
Select/Toggle icon. Toggles an option's status or accesses a screen where
additional options exist when the key (right) below this icon is pressed.
2
Main Screen Secondary Screen