Troubleshooting - oneConcept Freeze Me Manual De Instrucciones

4. Clean the shell
• Clean with neutral detergent and soft cloth.
Note: cut off the power supply when clean the appliance as there have a
high pressure in the body. Do not leave any water on the surface of control
panel.

TROUBLESHOOTING

Malfunction
The device is not
responding.
The device does not react
or shows malfunctions.
Das Gerät reagiert nicht
oder weißt Fehlfunktionen
auf.
Causes
The main switch is in the
"Off" position or the mains
plug is not plugged in.
The humidification effect
does not work properly.
The air filters are blocked
by dust.
The air inlet is blocked by
foreign objects.
No cause recognizable.
Water has entered the
interior of the unit or
foreign bodies are stuck in
the ventilation opening.
Solution
Plug the mains plug into
the socket and set the
main switch to the "On"
position.
Press the ON button on
the control panel.
Clean the air filters.
Remove the foreign
objects.
Contact your service
representative.
Contact customer service.
EN
21