Operation - oneConcept Freshboxx Manual De Instrucciones

OPERATION

When using the appliance, make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline. If you need cooler
more, add ice block into upper water slot, see following image.
Note: the ice box should be far way from children to avoid eating.
1. Insert the plug directly into a standard AC socket-outlet. Be sure plug
fits tightly into outlet.
2. "COOLING" button (Note: don't use this button without water,to avoid
damage to parts.)
• The water pump starts operating. The draught becomes cooler and more
humid. Make sure that the outlet valve of the water tank is firmly seated.
Then add fresh water to the tank. Watch the water level indicator to
overfill or underfill the tank. After filling the tank with water, press the
COOL button. The unit will now blow cooler air. If you press the COOL
button again, operation is stopped.
• If the air cooling is not sufficient for you, you can add another ice block
to the water tank. To do this, remove the water tank lid. The maximum
quantity of ice blocks must not be exceeded, otherwise the appliance will
be damaged or an electric shock may occur.
• If you use a cool box instead of an ice block, place the cool box inside by
opening the lid of the water tank.
• You can pull out the water tank completely, change the water or clean the
water tank.
1. Rotate the small knob updown.
2 Pull out the water tank.
3. Add the water here
into the water tank..
4. Put ices into ice basket. Put
the ice box also into water.
EN
15