Specifications - JVC KD-BT11 Manual De Instrucciones

Specifications

AUDIO AMPLIFIER SECTION
Power Output:
Signal-to-Noise Ratio:
Load Impedance:
Tone Control Range:
Frequency Response:
Line-Out Level/Impedance:
Subwoofer-Out Level/Impedance:
Output Impedance:
Other Terminal:
TUNER SECTION
Frequency Range: FM:
AM: with channel interval set to 10 kHz: 530 kHz to 1 710 kHz
FM Tuner: Usable Sensitivity:
50 dB Quieting Sensitivity:
Alternate Channel Selectivity (400 kHz):
Frequency Response:
Stereo Separation:
AM Tuner: Sensitivity:
Selectivity:
36
20 W RMS × 4 Channels at 4 Ω
and ≤ 1% THD+N
80 dBA (reference: 1 W into 4 Ω)
Bass:
Mid-range:
Treble:
Q:
with channel interval set to 100 kHz
or 200 kHz:
with channel interval set to 50 kHz: 87.5 MHz to 108.0 MHz
with channel interval set to 9 kHz:
4 Ω (4 Ω to 8 Ω allowance)
±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz)
±12 dB (500 Hz, 1.0 kHz, 1.5 kHz, 2.5 kHz)
±12 dB (10.0 kHz, 12.5 kHz, 15.0 kHz,
17.5 kHz)
Bass: Q1.0, Q1.25, Q 1.5, Q2.0
Mid-range: Q0.5, Q0.75, Q1.0, Q1.25
40 Hz to 20 000 Hz
2.5 V/20 kΩ load (full scale)
2.5 V /20 kΩ load (full scale)
1 kΩ
CD changer jack, AUX (auxiliary) input jack,
Antenna input
87.5 MHz to 107.9 MHz
531 kHz to 1 602 kHz
11.3 dBf (1.0 μV/75 Ω)
16.3 dBf (1.8 μV/75 Ω)
65 dB
40 Hz to 15 000 Hz
35 dB
20 μV
35 dB