Using The Bluetooth Cellular Phone; Making A Call - JVC KD-BT11 Manual De Instrucciones

Using the Bluetooth cellular phone

1
—
2
3
When a call comes in....
The source is automatically changed to "BLUETOOTH,"
then "RCV CALL" (receive call) and the phone number
appear alternately.
When "AUTO ANSWER" is activated....
The unit answers the incoming calls automatically, see
page 26.
• When "AUTO ANSWER" is deactivated, press any
button (except
incoming call.
• You can adjust the microphone volume level (see
page 26).
To end the call
Hold any button (except
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Press any button (except
• To restore the on-hold call, press any button (except
0
and ) again.
• When you end one call, you can connect to the other.
12
Establish the connection with a device.
(See pages 10 and 11.)
Enter Bluetooth menu.
Select "CALL," then make a call or settings using the
"SETTINGS" menu.
(See the following and page 26.)
0
and ) to answer the
0
and ).
0
and ).
When a text message comes in....
If the cellular phone is compatible with text message
notification via Bluetooth and "MSG NOTICE" (message
notice) is set to "ON" (see page 26), the unit rings and
"RCV MESSAGE" (receiving message) appears on the
display to inform you of the message arrival.
• You cannot read, edit, or send a text message
through the unit.

Making a call

1
While listening to a source...
2
Select "CALL."
3
Select a method to make a call.
• DIALED *: Shows the phone numbers you have
=
dialed go to the following step.
• RECEIVED *: Shows the received calls
the following step.
=
go to