Sharp SD-AT100W Manual De Manejo página 53

! Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
and press the ENT button.
3
Within 10 seconds, press the or
speaker.
4
Within 10 seconds, press the or
" You can adjust the level at 1 dB intervals.
" To adjust the levels of other speakers, repeat the operation from step 3.
" You can complete the setting operation by pressing the RETURN
twice.
Speaker type
FL Front speaker (Left)
CT Centre speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer
Note:
Adjust the level of the subwoofer if the sound from it is distorted.
! Test tone
You can check the sound output from the speakers. (If the speaker levels are not
equalised, they can be adjusted, too.)
1
2
button to select "SP LEVEL",
button to select the desired
button to adjust the level.
3
If the levels are not equal:
button
Whilst the test tone sounds, press the
You can select a speaker by pressing the
Adjustable range
Note:
- 6 dB - + 6 dB
If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will be
heard from it.
- 6 dB - + 6 dB
- 6 dB - + 6 dB
- 6 dB - + 6 dB
- 6 dB - + 6 dB
- 10 dB - + 10 dB
Press the SET UP AMP button.
Within 10 seconds, press the or button to select "TONE", and
press the ENT button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
FL CT
SW SL
To finish checking, press the RETURN
or to adjust the level.
or button.
02/2/27 SD-AT100W(X)E6.fm
SD-AT00W
ENGLISH
FR
SR
button twice.
E-52
4