CESVA SC202 Manual Del Usuario página 132

PÁRRAFO DESCRIPCIÓN
IEC 61260
5.17 Overload indicator
5.17.1 The operation and interpretation of overload
indications.
5.19 Maximum input signal
Maximum root-mean square voltage of the
sinusoidal input signal
5.20 Output terminals and terminating
impedances
5.20.1 If applicable, the input and output
impedances necessary to ensure proper
operation of the instrument.
5.22 Sensitivity to various environments
5.22.2 Ambient air temperature and relative
humidity
5.22.2.1 Range of relative humidity and corresponding
air temperature over which the instrument can
operate.
5.23.3 Immunity to power-frequency and radio-
frequency fields
5.23.3.11 Mode of operation and the connecting
devices (if any) that produces the minimum
immunity to power and radio-frequency fields.
5.23.4.3 The instruction manual shall describe the
mode of operation of, and the connecting
devices () if any) to, the instrument that
produces the greatest electromagnetic
emissions.
7 INSTRUCTION MANUAL
7.1 a) All filters in each analysis channel () if more
than one channel is available) conforms to all
performance requirements of this standard
7.1 b) For each analysis channel, a list of nominal
mid-band frequencies for all filters for all
filters of each available filter bandwidth
7.1 c) Reference attenuation
7.2 Operation
7.2 a) Linear operating range
130
SECCIÓN Manual SC202
11.4 Indicador de sobrecarga (overload)
20.2.1 Modelos de micrófono y sus características
principales
20.2.1 Modelos de micrófono y sus características
principales
20.6 CRITERIOS AMBIENTALES
ELECTROSTÁTICOS Y DE RADIOFRECUENCIA
20.6 CRITERIOS AMBIENTALES
ELECTROSTÁTICOS Y DE RADIOFRECUENCIA
20.6 CRITERIOS AMBIENTALES
ELECTROSTÁTICOS Y DE RADIOFRECUENCIA
20.6 CRITERIOS AMBIENTALES
ELECTROSTÁTICOS Y DE RADIOFRECUENCIA
20.5 FILTROS DE BANDAS DE OCTAVA Y TERCIO
DE OCTAVA
El SC202 sólo tiene un canal
20.5.1 Filtros de bandas de octava y tercio de octava
20.5.1 Filtros de bandas de octava y tercio de octava
Capítulo 25 Referencia a normas