Uline OHAUS RANGER H-9554 Manual Del Usuario página 12

Gross
Set the status.
• OFF = Disabled
• ON = Gross weight is printed.
Net
Set the status.
• OFF = Disabled
• ON = Net weight is printed.
Tare
Set the status.
• OFF = Disabled
• ON = Tare weight is printed.
Header
Set the status.
• OFF = Disabled
• ON = Header is printed.
NOTE: See page 20 for how to enter
Header line.
Footer
Set the status.
• OFF = Disabled
• ON = Footer is printed.
NOTE: See page 20 for how to enter Footer line.
Mode
Set the status.
• OFF = Disabled
• ON = Mode is printed.
Unit
Set the status.
• OFF = Disabled
• ON = Unit is printed.
Info
Set the status.
• OFF = Disabled
• ON = Reference information is printed
(ex. check limits).
PAGE 12 OF 69
MENU SETTINGS CONTINUED
APW
Set the status.
• OFF = Disabled
• ON = Enabled
Accu
Set the status.
• OFF = Disabled
• RESULT = Accumulation result is printed.
• ALL = All Accumulation data is printed.
NOTE: See page 21 for sample print out.
LAYOUT [LAYOUT]
Set the format of the data output to a printer or
computer.
Format
Set the printing format.
• MULTI = A multi-line (single column style) printout is
generated.
• SINGLE = A single line printout is generated.
Feed
Set the paper feed.
• LINE = move a paper up one line after printing
• 4LF = move a paper up four lines after printing
• FORM = a form feed is appended to the printout
DATA TRANSFER [DATA.TR]
Output weighing results directly to a PC application.
• OFF = disabled
• ON = enabled
NOTE: Data Transfer Function is not supported
in Windows® 7/8. OHAUS provides SPDC
software for Windows 7/8 users.
If the weighing value is a negative number, set the
target cell in TEXT format. Otherwise, Excel will not
distinguish it as a negative number.
Do not use this function during continuous printing.
1021 IH-9554