Uline OHAUS RANGER H-9554 Manual Del Usuario página 3

NOTE: When battery symbol blinks fast,
approximately 30 minutes of working time
is left.
NOTE: When [Lo.bAt] is displayed, the scale will
shut off.
NOTE: Charging the scale must be performed
in a dry environment.
DISPLAYS
BUTTON
ON/ZERO
Turn on scale.
Primary Function
(Short Press )
1
Zero the display.
Secondary
Turn off scale.
Function
(Long Press )
2
Accept the
Menu Function
current menu
(Short Press)
or setting.
Accept the
Library Function
current setting.
(Short Press)
PAGE 3 OF 69
INSTALLATION CONTINUED
Yes
Print
Units
No
PRINT
Send the
displayed value
to the COM port.
Off Units
Change the
weighing unit.
Yes No
Advance to the
next menu or
setting. Increment
the displayed
value.
Yes No
Advance to the
next library or
setting. Increment
the displayed
value.
CAUTION! Battery should be replaced only
by an authorized service personnel. Risk of
explosion can occur if the rechargeable
battery is replaced with the wrong type or if
it is not properly connected. Dispose of the
lead acid battery according to local laws and
regulations.
OPERATION
Target
Menu
Back
Target
Initiate the Accumulate the
function of weight or pieces.
the current
application mode.
Switch between
Check Weigh,
Enter user menu.
Check Count and
View the Audit Trail
Off.
event counters
(extended press)
Back
Go back to Exit the menu.
the previous Abort the
menu or setting. calibration in
Decrement the progress.
displayed value.
Back
Go back to Exit the library.
the previous
library or setting.
Decrement the
displayed value.
M+
ID
Exit
M+ ID
ID number input
for library record
edit/recall.
Menu
Exit
Exit
APW
APW
Display/Store an
APW
1021 IH-9554