6
7
MAINTENANCE
Clean the plastic parts with soap and warm water, then carefully dry all the components.
Hand wash at temperature no higher than 30°C. Leave to dry naturally in a shaded place.
If the upholstery is exposed to sunlight for prolonged periods of time it may affect the colour of the fabric.
SMART comes with a guarantee with precise specifications for correct maintenance, which are important for the
guarantee to remain fully valid.
For your safety and the good conservation of this product, it is important to bring it to one of our official workshops for
regular inspections.
INFORMATION ABOUT THE GUARANTEE
This product comes with a guarantee in compliance with Royal Legislative Decree 1 / 2015 of 24 July. Keep your purchase
receipt, you will need to show it in the shop where you bought the product to prove the guarantee is valid if you have
any complaints.
This guarantee excludes any defects or breakages caused by inappropriate use of the article or inobservance of the safety
and maintenance rules listed in the instruction pages and on the care labels, as well as faults caused by wear and tear
through normal use and daily handling.
The label displaying the chassis number of the model should never be taken off, it contains important information.
NOTICE: For maximum safety and care for your new JANÉ item, it is very important that you register your new product
on our website www.janeworld.com. This registration means we can inform you, if necessary, of the evolution and
maintenance of your product. Additionally, if you would like, we can also inform you about new models or news that we
think may be useful for you.
FOOT COVER
6 To open the foot cover (A), open the zips on the left and/or right of the SMART
carrycot to the desired position.
USING THE HOOD
7 The hood (C) can be folded, unfolded and removed.
To attach the hood, fasten the clips to the ones on the carrycot as shown in the
illustration.
To remove the hood, follow the same process in reverse.
WARNING: Do not put weight on top of the hood.
EN
7