Technical Data; Protecting The Environment; Ec Declaration Of Conformity - Stanley FATMAX FMC792 Manual Del Usuario

ENGLISH
Problem Possible Cause
Tool operates, Low battery charge or
but does damaged battery.
not drive the
fastener fully.
Depth adjustment set
too shallow.
Tool not firmly applied
to workpiece.
Material and fastener
length too rigorous an
application.
Maintenance
Your Stanley Fat Max corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool/appliance care and regular cleaning.
Warning! Switch off and unplug the appliance before carrying
out any cleaning.
Dirt and grease may be removed from the exterior of the
u
appliance using a cloth.
Warning! NEVER use solvents or other harsh chemicals
for cleaning the non-metallic parts of the appliance. These
chemicals may weaken the materials used in these parts. Use
a cloth dampened only with water and mild soap. Never let
any liquid get inside the unit; never immerse any part of the
unit into a liquid.
Warning! NEVER spray or in any other way apply lubricants
or cleaning solvents inside the tool. This can seriously affect
the life and performance of the tool.
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the nailer. Servicing at an authorized
service center is required to avoid damage to static sensitive
internal components.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
12
(Original instructions)
Possible Solution
Charge or replace battery.
Rotate depth adjustment
wheel to
a deeper setting.
Read instruction manual.
Choose appropriate material
or fastener length.

Technical data

Voltage
V
Barttery Type
Actuating mode
Magazine angle
No load speed rpm
Drive energy
approx
Weight (bare tool) kg
Fasteners
Length
mm
Shank diameter mm
Angle
Charger
Input voltage
V
AC
Output voltage V
DC
Current Ah
Approx. charge time
Weight (bare
kg
charger)
Battery
Voltage V
AC
Capacity Ah
Weight
kg
Type
Level of sound pressure according to EN 60745 - 1:
Sound pressure (L ) 87 dB(A), uncertainty (K) 1.5 dB(A)
pA
Sound power (L ) 92 dB(A), uncertainty (K) 2.5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745 - 2 - 16:
2
Staple nails (a ) 1.8 m/s , uncertainty (K) 1.8 m/s
h

EC declaration of conformity

MACHINERY DIRECTIVE
FMC792 Type:1
18
DC
Li-Ion
Sequential
Straight
9100
60J
2.6
25 - 64
1.6
Straight
90611165
230
18
2.0
1 hr (2.0 Ah)
2 hr (4.0 Ah)
0.45
FMC687L FMC688L
18
18
2.0ah 4.0ah
0.35 0.67
Li-Ion Li-Ion
2