Introduction; Intended Use; Features; Package Contents - Parkside PHSSA 12 A1 Traducción Del Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
HYBRID CORDLESS IMPACT
WRENCH PHSSA 12 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for undoing car wheel
bolts/nuts to enable the changing of automobile
tyres. This appliance is also intended for loosely
screwing in car wheel bolts/nuts.
The appliance is not suitable for tightening wheel
bolts/nuts.
Use a scaled torque wrench for tightening bolts.
Always use the torques specified in the manu-
facturer's data.
The appliance has a clockwise/anticlockwise
rotation, a 1/2" square socket bit holder and an
LED working light. The light on this appliance is
intended to illuminate the immediate work area of
the appliance.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer ac-
cepts no liability for damages caused by improper
use or incorrect operation of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
GB │ IE
14 
WARNING!
The current tolerance of your vehicle's wiring
system be compatible with the connected
appliance (min. 20 A).
Refer to your vehicle handbook (cigarette
lighter).
Working with the vehicle connector plug is
only intended for emergency operation,
e.g. if the battery pack is empty.
Using the vehicle connector plug with greatly
reduce the performance of the appliance.
ONLY short-term operation – NOT for con-
tinuous operation.

Features

Tool holder
Battery LED (status display)
Rotation direction switch
Battery pack
Release button for the battery pack
ON/OFF switch/speed control
LED working light
Sockets (17/19/21/23 mm)
High-speed charger
Green charge control LED
Red charge control LED
Battery adapter
Vehicle connector plug

Package contents

1 hybrid cordless impact wrench PHSSA 12 A1
1 high-speed battery charger PHSSA 12 A1-2
1 charger cable for 12 V cigarette lighter
1 battery pack PHSSA 12 A1-1
4 sockets (17/19/21/23 mm)
1 carrying case
1 set of operating instructions
PHSSA 12 A1

Publicidad

Tabla de contenido
loading

Tabla de contenido