Dreame V12 Manual Del Usuario página 19

Care & Maintenance
Cleaning the HEPA Filter Assembly
1. Place the vacuum securely on a flat surface, then turn the HEPA filter assembly cover in
the direction indicated and remove the HEPA filter assembly.
Note: Remove the built-in foam pad before cleaning the HEPA filter assembly.
2
2. Rinse the HEPA filter and foam pad with water. To thoroughly remove all the dust caught
in the filter, rotate the HEPA filter 360 degrees while rinsing. Lightly tap the filter against
a sink several times to remove any excess debris. Keep the HEPA filter in a well-ventilated
and cool place to fully dry.
Note: Fully dry the filter (at least 24 hours) before reinstalling it.
1
3
11
10
9
8
7
12
1
2
24 hrs
3
4
5
6
17
EN