The Powerboost Function; Use Limitations; To Activate; To Turn Off - NEFF T4.T.0 Serie Instrucciones De Uso

The Powerboost Function

The Powerboost function can be used to heat food more
quickly than using the power level

Use limitations

This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the display of the selected hotplate will flash
Š ; then it will automatically set the power level
*URXS 
 
 
*URXS 

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
The range should be switched on.
Select the hotplate using the Tipp control.
1.
Press the symbol.
3 ‹‹
2.
function display. Select the required cooking time using the
Tipp control.

After a few seconds the cooking time begins to count down.
22
Š .
Š .
*URXS 
 

 
*URXS 
is displayed in the time program


To activate

Select the hotplate using the Tipp control.
1.
Press the
˜
2.
The function has been turned on.

To turn off

˜ and
Select the hotplate using the Tipp control.
1.
Press the
˜
2.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays and the time program function screen displays
‹
for one minute. The
Pressing any symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set to
.
‹‹
Notes
If cooking times have been programmed for various plates,
■
the time program function displays the shortest cooking time.
The x indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
■
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a plate may be cancelled or
changed:
Select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set to
.
‹‹
symbol.
symbol.
indicator of the hotplate flashes.
x
‹‹
symbol
3
symbol
3