Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Turning on and off the childproof lock.
The range should be turned off.
To turn on: press and hold the
The
indicator lights up for 10 seconds. The range is locked.
‚
To turn off: press and hold the
seconds. The lock is now deactivated.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Use limitations
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the display of the selected hotplate will flash
Š
; then it will automatically set the power level
In group 2, the powerboost function may be activated at the
same time for all hotplates (see picture).
*URXS
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
The range should be switched on.
Select the hotplate using the Tipp control.
1.
Press the
symbol.
3
‹‹
2.
function display. Select the required cooking time using the
Tipp control.
–
symbol for approx. 3 seconds.
symbol for approx. 3
–
Š
.
Š
.
*URXS
*URXS
is displayed in the time program
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the "Basic Settings" section.
To activate
Select the hotplate using the Tipp control.
1.
Press the
˜
2.
The function has been turned on.
and
To turn off
˜
Select the hotplate using the Tipp control.
1.
Press the
˜
2.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
After a few seconds the cooking time begins to count down.
Once the time has elapsed
The plate is turned off. The warning signal sounds, the hotplate
displays
and the time program function screen displays
‹
for one minute. The
‹‹
Pressing any symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
select the hotplate using the Tipp control. Press the
and change the cooking time using the Tipp control, or set to
‹‹
.
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected hotplate
reaches the desired temperature.
Notes
If cooking times have been programmed for various plates,
■
the time program function displays the shortest cooking time.
The
x
indicator of the hotplate lights up.
To check the remaining cooking time of a hotplate: select the
■
hotplate using the Tipp control. The cooking time will be
displayed for five seconds.
Cooking time can be programmed for up to 99 minutes.
■
symbol.
symbol.
indicator of the hotplate flashes.
x
symbol
3
29