Care And Storage; In The Event Of Problems - Beurer MG 130 Instrucciones Para El Uso

To start with, gently press the part of your body you wish to massage against the massage de-
vice. Particularly when lying down, make sure that you gently lift your weight off the correspon-
ding part of your body. Then make sure that you are in a comfortable position before gradually
shifting your weight onto the massage device.
Neck massage

7. Care and storage

Cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no
more than lightly moistened. You can also use a mild detergent. The removable cover is machinewashable
at 40 °C. Please note the cleaning and care symbols on the label which is sewn into the cover.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
Storage
• Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.
• Avoid any contact with sharp or pointed objects which could damage the device or cover.

8. In the event of problems?

Problem
Massage heads
rotating at reduced
speed.
Massage heads
not moving.
Cause
The load on the massage
heads is too great.
Appliance not connected
to the power supply.
Switch set to "0".
Overheating protection
tripped.
Leg massage
Remedy
Release the massage heads.
Connect the plug to the mains supply and
switch on the appliance.
Switch on the appliance (switch position I or II).
Disconnect the device from the power supply,
wait at least 15, release any blocked massage
heads, reconnect and switch on.
12