Turning On The Printer - Canon imagePROCRAF TZ-30000 Guía De Configuración

1
Removing the Packaging Material
Remove the tape and other packaging material. Remove the tape affixed to the roll holder.
2

Turning On the Printer

1
Open the top cover.
4
Pull up and remove the belt stopper.
●
Keep the belt stopper for future use. You will need it in case you
move the printer to another location.
Note
● The belt stopper can be stored in the accessory drawer. (P.15)
2
Remove the tape and cushioning
material affixed to the inner cover.
5
4
3
Open inner cover.
Remove the tape.
●
Peel off the tape affixed to the carriage, and then remove the
cushioning material.