STEINEL XLED CAM 1 Manual De Instrucciones página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
Product parts (Fig. 3.3)
A
Sensor­switched floodlight
B
Clip
C
Connecting terminal
D
Wall mount
E
Sensor unit
F
Camera
Reset button
G
H
Status LED
I
Slot for memory card
J
2 grub screws
Connection (Fig. 3.4)
The supply lead is a three­core cable:
L
= phase conductor (usually black,
brown or grey)
N
= neutral conductor (usually blue)
= Protective­earth conductor
(green/yellow)
Technical specifications
Enclosure, light and sensor
– Dimensions (H × W × D):
275 × 210 × 167 mm
– Power supply:
220-240 V, 50/60 Hz
– Power consumption:
– Area illuminated to the front: 444 cm²
– Luminous flux:
– Efficiency:
– Light colour:
3000 K (warm white)
– Colour­rendering index:
– Life expectancy (L70 B50):
– Sensor technology:
– Angle of coverage:
180° with 45° angle of aperture
– Detection reach:
– Mounting height:
– Twilight setting:
– Communication:
Wi-Fi 2400-2483.5 MHz
– Transmission power:
– Night light:
– Time setting:
1 min, 3 min, 10 min, 15 min
– Temperature range:
– IP rating:
– Protection class:
Camera
– Resolution:
– Viewing angle:
– Setting angle:
– Memory card:
4. Installation
Touching live parts can result in electri­
cal shock, burns or death.
• Switch OFF power and interrupt
• Using a voltage tester, check to make
21 W
• Make sure power supply remains
2200 lm
106 lm/W
Risk of damage to property!
Mixing up connection leads may pro­
Ra ≥ 80
duce a short circuit.
• Identify connection leads.
50000 hours
• Re­connect connection leads.
Passive infrared
Preparing for installation
• Check all components for dam­
10 m tangential
1.8 - 2 m
• Select an appropriate site to install
10-10000 lux
< 100 mW
0 - 40%
-10°C to +40°C
17
1920 x 1080 px
horizontal 90° to either side
vertical 20° to 30°
Hazard from electrical power.
power supply.
sure the light is disconnected from
the power supply.
interrupted.
age. Do not use the product if it is
damaged.
the product.
– Take reach into consideration.
(Fig. 4.1)
– Take reach and motion detection
into consideration. (Fig. 4.2/4.3)
– Vibration­free.
– No obstacles in detection zone.
IP44
I
horizontal 110°
vertical 90°
max. 64 GB

Publicidad

Tabla de contenido
loading

Tabla de contenido