Led Indications; Troubleshooting - Motorola Solutions PMPN4563 Guia Del Usuario

MN007796A01-AB
Chapter 2 : Charger Overview
2.2

LED Indications

LED indications are associated with charger software version 1.05 and above.
Table 5: Motorola Solutions non-IMPRES Batteries
Charger Indication
Green for approximately
one second
Steady Red
Steady Red
Flashing Green
Steady Green
Flashing Red
Flashing Amber
2.3

Troubleshooting

The following table explains the possible problem and the ways to troubleshoot on the problem.
Table 6: Troubleshooting
Problem
Charger powers on, but the LED does not flash
Green.
Fault
10
Description
Charger powers on
Battery detected
Rapid Charging
Charged up to 90 % or more.
Charged up to 95 % or more.
Fault
Standby
• Battery is waiting to rapid charge.
• Battery may be too hot, too cold or low volt-
age.
Solution
Make sure that the power cord is securely plug-
ged into the charger and an appropriate AC
power outlet, and that there is power to the out-
let.
Inspect fuses and replace as necessary.
Check if the radio or the stand-alone battery is
inserted correctly.
Check for contact contamination or corrosion:
• Remove the radio or stand-alone battery
from the charger.
• Verify that the battery is an authorized Mo-
torola Solutions battery listed in
torola Solutions non-IMPRES Batteries on
page 7. Other batteries may not charge.
Table 3: Mo-