Blowing Function; Care And Maintenance; Warranty Conditions - Lavorwash ASHLEY 110 Manual De Instrucciones

animals or property caused by misuse of the
appliance, not in compliance with manual
instructions.
HOW TO PREPARE AND USE THE ELEC-
TRIC ASH VACUUM CLEANER
• Make sure the filter G is fitted in its housing .
-
Insert cloth bag G fully inside cage Y
Push filter G fully home (fig. (4).
-
• Connect steel pipe C to the relevant seat E (fig. (1).
• B efore vacuuming the ash, check that it is
cold and no longer alight.
Do not vacuum burning embers
• D o not empty the drum into a container
which is easily inflammable and make
sure that the ashes are completely cool.
• If ashes hose C becomes hot during use, turn
the device off immediately and let it cool.
• Turn the appliance on using the (I)ON/(0)OFF
switch, located on the cover of the motor.
• Vacuum the ash directly from the fireplace
or from the stove (wood or pellet-burning).
Hold the suction nozze about 1 cm. above
the ash.
• If there should be a reduction in the suction
power, turn the motor off using the switch
• When the appliance is no longer in use, turn
it off and take the plug out.
• Perform the cleaning operations first on the
stove or fireplace and then on the appliance and
the suction filter (to be performed outside the
building).

BLOWING FUNCTION

(fig.(2) Before using the appliance blowing function,
proceed as follows to prevent dirtying the house
with ash:
• make sure the filter is clean.
• Make sure the drum is clean.
• Make sure the flex hose is clean.
• Make sure that filter G is inserted in the relevant
seat (fig. (3) (4).

CARE AND MAINTENANCE

The unit is maintenance-free.
• T he machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the
carrying handle located on the motor head.
• Store the appliance and the accessories in a
dry safe place, out of the reach of children.
FILTER CLEANING
• T he machine shall be disconnected from its
power source, by removing the plug from the
(fig. (3)
.
socket-outlet, during cleaning or maintenance
1- Remove the filter G
2- Shake the filter G
• O nce the filter has been cleaned, check
whether it is suitable for further use. If it has
been damaged or broken, replace it with an
original filter.

WARRANTY CONDITIONS

All our machines are subjected to strict tests and
are covered against manufacturing defects in accor-
dance with applicable regulations. The warranty is
effective from the date of purchase.
The following are not included in the warran-
ty: - Parts subject to normal wear. - Rubber parts,
charcoal, filters and the accessories and optional
accessories. - Accidental damage, caused by trans-
port, neglect or inadequate treatment, incorrect or
improper use and installation failing - The warranty
shall not cover any cleaning operations to which
the operative components may be subjected, such
as clogged nozzles and filter blocked due to lime-
stones.
This pressure cleaner is intended to be used for
domestic and hobby work: the warranty does not
cover any other different kind of use.
DISPOSAL (WEEE)
As the owner of electrical or electronic
equipment, the law (according to European
Directive 2012/19/EU) prohibits you from disposing of
this product or its electrical / electronic accessories
as municipal solid waste and obliges you to make
use of the appropriate waste collection facilities.
The product can be disposed of by returning it to
the distributor when a new product is purchased.
The new product must be equivalent to that being
disposed of.
7
Acoustic pressure Lpa 75 db (A)