NORAUTO NS-318 DBT Manual De Instrucciones página 198

other stations with sufficient quality�
If the TA mode is activated and a traffic announcement is being
broadcast:
- when the device is in a different operating mode than FM radio,
it will temporarily switch to radio
When the TA function is activated:
- And you click TFT screen
always find stations that provide TA broadcasts�
- And a station with TP information is tuned, TP is shown on the
radio interface�
PTY (Program Type Codes)
This code is used to designate the current program material�
This function is used to search for stations corresponding to your
selected program category, such as news, easy music, sport,
etc� There is a relatively large number of program types and
the inclusion of a broadcast program in a certain category also
depends on the focus of the given station�
After selecting the PTY mode, the radio will start to scan
for corresponding PTY information and will stop if it detects
corresponding PTY information� If the corresponding PTY
information does not exist, the PTY mode will switch back to normal
mode�
TP (Traffic Program)
Information that a given station is using a traffic announcement/
news system�
PI (Program Identification)
This is a code that identifies the Radio data system station�
PS (Program Service Name)
The name of the current broadcasting station is shown on the display�
Sometimes it is used for other messages of the broadcaster�
icon to scan for stations, it will
197